Analog Temperature Controller (

Heating Controllers

)		 HOME>Analog Temperature Controller
(Product INFO> Heating Controllers)
 
 

 
Division Content
 Temperature Setting Scope  5~35`C
 ON-OFF Temperature Difference  ¡¾1`C
 Consumption Power  2VA Max
 Load Current  1A Max
 Temperature Transducer  NTC Thermistor
 

The input power is 240VAC, 50Hz

Temperature Range : ¡°OFF" ~ 35 ¡É

The application is for heating and the maximum capacity for the contact relay is

  240VAC/30A, i.e. , 3.0KW/h.

After the input power and the heater connection is completed, operate the dial.

  Set the appropriate temperature by turning the dial based on the sensor temperature attached to the temperature controller.
When the heater operates, the red lamp lights
Before the input power, check the operation of an earth leakage circuit breaker
  (ELB).
 
Use the rated voltage.
Avoid excessive temperature and humidity or impact.
Avoid acid, alkali, oil, dust and direct sunlight.
Prepare safety measures including the use of duplicated circuit (ELB) when using
  devices that may damage your property.